www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

Replacing V318 Horn
https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=15372		 Page 1 of 1
Author:  firecadet613 [ Mon Apr 03, 2017 4:44 pm ]
Post subject:  Replacing V318 Horn
Has anyone replaced the horn on a 318/338 yet? Tried to take it apart and clean the contacts, no luck.

Not much wiring visible and I'm not sure if I can pull some out to tuck it back in when I'm done splicing the new one in. There does not appear to be any access from the cabin/head.

Image

At first I thought it was this one,

https://www.wholesalemarine.com/ongaro- ... -horn-12v/

But after looking closer at the Four Winns Parts Book and Googling the part number, it appears it's this one.

https://www.amazon.com/SEACHOICE-50-145 ... B000N9NVMM
Author:  SpecialK [ Mon Apr 03, 2017 8:49 pm ]
Post subject:  Re: Replacing V318 Horn
I replaced mine last summer. I used an AFI/marinco horn.
Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/