www.iFourWinns.com

Heard a roller or bunk style would work. And that a FW trailer is not all that great. Any recommendations out there? Found an used bunk style Shorelander that the owner says worked fine for his 6000 lb Sea Ox. It's a 24 ft long dual axle galvanized trailer but only has two bunks that ride on two large cross members. Doesnt look all that sturdy.
Just need it to store the boat in the winter 10 miles away from the marina.
Thnx.

I have a load rite roller trailer for my 248. I like the trailer ok, it loads awesome. I like how the rollers center the boat on the trailer. Pulls great with my boat. I think I have the 8400 lb trailer. Sucks part is it's getting older and I need to replace some rollers. There are 64 at 10 bucks a piece

_________________

2001 Four Winns Vista 248 by rick2752, on Flickr

Nice boat n trailer. Notice the boat rides over the fenders by an inch or two. I assume the trailer is 8 to 8 1/2 ft wide?. How long is the trailer?
Thnx

Trailer is about 30 or 31 long. The fenders are about an inch or 2 wider than the boat at fender height. My trailer has a very long tongue in front of the bow I researched and I guess do to tidal conditiones they made it that way.

_________________

2001 Four Winns Vista 248 by rick2752, on Flickr