| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Hatch windows? https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=15628 |
Page 1 of 1 |
| Author: | Waterfreak66 [ Mon Jul 24, 2017 8:06 am ] |
| Post subject: | Hatch windows? |
I need to source the round hatch windows that are on the top of the deck on a 1997 278. I also need the latching hardware for the oblong oval side hatch windows. Anyone know where I can get these? |
|
| Author: | waterrat [ Mon Aug 07, 2017 7:55 am ] |
| Post subject: | Re: Hatch windows? |
I was concerned about my hatch window on our 1996 258V. In talking to our Four Winns dealer you need to find the manufacturer, apparently there were 3 suppliers, West Marine seem like a likely source since 4 Winns are no longer are suppling them. Turned out mine needs to be gliued to the hinge with epoxy, whew! |
|
| Author: | cgullette [ Wed Aug 09, 2017 9:40 am ] |
| Post subject: | Re: Hatch windows? |
I was able to source the black plastic handles for the oval windows from Four Winns through our local dealer in Charlotte, NC. The hatch was also available as ours was broken where the support arm attaches to the mounting ring. The hatch was about $1000 so I decided to make my own repair with JB weld. Good luck |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|