www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
Vista 268 Swim Platform Edging/Trim Options https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=15733 |
Page 1 of 1 |
Author: | firecadet613 [ Mon Sep 18, 2017 9:24 am ] |
Post subject: | Re: Swim Platform Edging/Trim Options |
YYZ-RC wrote: My 268 had some jury-rigged aluminum edging installed around the perimeter of the swim platform; a simple L channel that was screwed into the platform and the backs of the screws were ground flush with the platform. It was all banged up with pieces missing so I removed it. I'm now left with an ugly edge (the edging was hiding many docking mishaps, of course) and a bunch of screw holes. Is there an elegant solution to clean up the edge the swim platform? I came across this which might work but not sure how well it would stay attached: https://www.fpmarine.com/U-shaped-motor ... x%20wh.htm Thanks! viewtopic.php?f=6&t=5511 I'll try and update with pics. When I bought my 268 the swim platform was all dinged up from the dry stack forklift. Very easy to do and it looked great when it was all said and done. |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |