My 268 had some jury-rigged aluminum edging installed around the perimeter of the swim platform; a simple L channel that was screwed into the platform and the backs of the screws were ground flush with the platform. It was all banged up with pieces missing so I removed it.
I'm now left with an ugly edge (the edging was hiding many docking mishaps, of course) and a bunch of screw holes. Is there an elegant solution to clean up the edge the swim platform?
I came across this which might work but not sure how well it would stay attached:
https://www.fpmarine.com/U-shaped-motor ... x%20wh.htmThanks!
I'll try and update with pics. When I bought my 268 the swim platform was all dinged up from the dry stack forklift. Very easy to do and it looked great when it was all said and done.