| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Bow Rail Dia on a 248 Vista https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=1575 |
Page 1 of 1 |
| Author: | Beachbob [ Sat Feb 23, 2008 11:46 am ] |
| Post subject: | Bow Rail Dia on a 248 Vista |
Does anybody know off hand what the dia of the bow rail is on a 248 Vista? Thanks |
|
| Author: | beyond the blue [ Sat Feb 23, 2008 3:52 pm ] |
| Post subject: | Re: Bow Rail Dia on a 248 Vista |
The bow rails on my 238 Vista are 1" dia. They are the same on a 258 as you can see at http://www.fourwinnsuk.com/vista_258.php under hull/deck info. They don't list a 248 on this site as I can see, but my money is on it being the same.Hope this helps. |
|
| Author: | Brett248Vista [ Sat Feb 23, 2008 5:04 pm ] |
| Post subject: | Re: Bow Rail Dia on a 248 Vista |
I haven't measured but I am fairly certain mine are 1" |
|
| Author: | Beachbob [ Sat Feb 23, 2008 6:33 pm ] |
| Post subject: | Re: Bow Rail Dia on a 248 Vista |
Thanks, they are 1 inch; the info is buried in the hull/deck info. With all the snow we received last night I spent the morning sorting out items that will go on the new boat, items that won't be needed and items that won't work. My rails on the Stingray were 7/8" and I have several items that clamp on the rail. If they won't work on the new boat I was going to let them go with the Stingray. Thanks!! |
|
| Author: | firecadet613 [ Wed Oct 22, 2008 11:08 am ] |
| Post subject: | Re: Bow Rail Dia on a 248 Vista |
Are they the same on a 225 Sundowner? Whats an easy way to measure my rail diameter? |
|
| Author: | beyond the blue [ Wed Oct 22, 2008 12:23 pm ] |
| Post subject: | Re: Bow Rail Dia on a 248 Vista |
Quote: Whats an easy way to measure my rail diameter? Measure the circumference with a soft tape measure and divide by 3.142 |
|
| Author: | firecadet613 [ Wed Oct 22, 2008 12:57 pm ] |
| Post subject: | Re: Bow Rail Dia on a 248 Vista |
I don't know why I keep forgetting about those soft tape measures! My wife has one. Thanks! |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|