| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Front berth bed https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=15859 |
Page 1 of 1 |
| Author: | Mark 72 [ Wed Mar 21, 2018 5:59 pm ] |
| Post subject: | Front berth bed |
2006 348 Boat is two hours away need help how thick is the front bed, I know i am going to need a king size and cut it down but if I get rid of the mattress how think will I need. If someone close could measure the thickness that would be great TIA |
|
| Author: | captain888 [ Wed Mar 21, 2018 8:33 pm ] |
| Post subject: | Re: Front berth bed |
6 inches on my 358 |
|
| Author: | babbot1 [ Thu Mar 22, 2018 2:32 pm ] |
| Post subject: | Re: Front berth bed |
Unless you need to reuse special sized sheets, or fear getting 2" closer to the ceiling, you can go thinker. I replace our 6" mattress last year with an 8" memory foam mattress I bought online for very cheap and cut it down. Super comfortable. There are many options out there on Amazon. |
|
| Author: | Mark 72 [ Thu Mar 22, 2018 6:58 pm ] |
| Post subject: | Re: Front berth bed |
how did you cut it (electric knife) |
|
| Author: | babbot1 [ Fri Mar 23, 2018 6:43 am ] |
| Post subject: | Re: Front berth bed |
Electric knife would be best if you have it but I just used new blade on a utility knife. Doesn't make great edges but they almost always supply a clothe "bag" you can fit the entire mattress in(just confirm when ordering). You never even see the foam unless you take it out of the bag to wash. The one we ordered had a nice clothe bag with a zipper and fabric on the bottom you would see on box springs. That black stuff I assume so the mattress can breath but not sure why its there.. Works great. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|