www.iFourWinns.com • View topic - Priming the water system

View unanswered posts | View active topics

Board index » Four Winns Models » Cruiser - Vista

All times are UTC - 6 hours [ DST ]

Priming the water system

Page 1 of 1

[ 3 posts ]

Print view

Previous topic | Next topic

Author

Message

hamifd189

Post subject: Priming the water system

Posted: Sun May 27, 2018 12:13 pm

Tadpole

Joined: Fri May 16, 2014 8:47 pm
Posts: 2

Hello,

I have a 2007 278 Vista. I am having trouble getting the water system primed. I get water out of the wet bar and bathroom faucet. The kitchen and transom faucet I am getting no water. I hooked up my shorline water and got some water out but no where near what I should be getting...thanks!

Top

Graham R

Post subject: Re: Priming the water system

Posted: Sun May 27, 2018 4:17 pm

email admin your custom rank

Joined: Thu May 18, 2006 12:31 pm
Posts: 2108
Location: Chester, UK

It doesn't really sound like it could be the cause, but check the pump is connected the right way around. Mine wasn't ! It's underneath the steps into the cabin.

Top

TheDanceII

Post subject: Re: Priming the water system

Posted: Tue Jun 05, 2018 3:54 pm

Shark

Joined: Tue Oct 27, 2015 7:52 am
Posts: 139
Location: Huntsville, AL

I have a similar problem from time to time.
It is not the pump.
It is the faucet screen due to contamination/corrosion. Remove the screen from the end of the faucet at the kitchen sink and clean good.
For the transom, mine has a Philips screw holding the shower head end on. Remove and clean good.

_________________
The Dance II
2007 278 Vista
6.2L Mercruiser

Top

Page 1 of 1

[ 3 posts ]

Board index » Four Winns Models » Cruiser - Vista

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 8 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum