| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Priming the water system https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=15943 |
Page 1 of 1 |
| Author: | hamifd189 [ Sun May 27, 2018 12:13 pm ] |
| Post subject: | Priming the water system |
Hello, I have a 2007 278 Vista. I am having trouble getting the water system primed. I get water out of the wet bar and bathroom faucet. The kitchen and transom faucet I am getting no water. I hooked up my shorline water and got some water out but no where near what I should be getting...thanks! |
|
| Author: | Graham R [ Sun May 27, 2018 4:17 pm ] |
| Post subject: | Re: Priming the water system |
It doesn't really sound like it could be the cause, but check the pump is connected the right way around. Mine wasn't ! It's underneath the steps into the cabin. |
|
| Author: | TheDanceII [ Tue Jun 05, 2018 3:54 pm ] |
| Post subject: | Re: Priming the water system |
I have a similar problem from time to time. It is not the pump. It is the faucet screen due to contamination/corrosion. Remove the screen from the end of the faucet at the kitchen sink and clean good. For the transom, mine has a Philips screw holding the shower head end on. Remove and clean good. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|