www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Thu Mar 28, 2024 7:57 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Sun Jul 08, 2018 10:24 am 
Offline
email admin your custom rank

Joined: Fri Apr 12, 2013 3:56 pm
Posts: 305
Location: Southern ohio
I am getting water in my aft cabin cabinets. I don't have air conditioning so they are just storage. Anyone have this issue before? The only area I can see that could be doing it is the drain beside the cuddy door. I cant figure out how to get to that pipe.

Thanks
Rick

_________________
Image
2001 Four Winns Vista 248 by rick2752, on Flickr


Top
 Profile  
 
PostPosted: Tue Jul 31, 2018 4:40 pm 
Offline
email admin your custom rank

Joined: Fri Apr 12, 2013 3:56 pm
Posts: 305
Location: Southern ohio
I couldn’t get that back panel out. I don’t know if they recarpeted it or what. I can get to the bottom screws in the panel. I’ve had the other side out no issues but couldn’t get that side out. Any tips?

_________________
Image
2001 Four Winns Vista 248 by rick2752, on Flickr


Top
 Profile  
 
PostPosted: Tue Jul 31, 2018 4:53 pm 
Offline
Livin' the Dream
User avatar

Joined: Thu Sep 29, 2016 9:23 am
Posts: 547
Location: Pontoon Beach IL
On mine, I slid Some thin cardboard between the vinyl on the ceiling and the top of the back plate. It’s tight for sure. I fought It. The ceiling of the locker has formed around mine.... may want to slide some card board at the bottom too. I used Thin stuff, like what separates the top and bottom section of a cube of Pepsi.... or 30 pack of beer

_________________
Current:
2000 Sea Ray 380 Sundancer "still Livin the Dream"

Past
2002 268 Vista 5.7 GXI "Livin' the Dream"
1996 Rinker 192 Captiva. "The Simple Life"
1999 Yamaha XLL 1200 Waverunner.
1976 Mercury Marquis tri hull 120 hp


Top
 Profile  
 
PostPosted: Sat Aug 04, 2018 6:27 am 
Offline
email admin your custom rank

Joined: Fri Apr 12, 2013 3:56 pm
Posts: 305
Location: Southern ohio
Did you guys take out carpet on bottom. That’s my issue. I can’t get to the two bottom screws

_________________
Image
2001 Four Winns Vista 248 by rick2752, on Flickr


Top
 Profile  
 
PostPosted: Sat Aug 04, 2018 5:44 pm 
Offline
Livin' the Dream
User avatar

Joined: Thu Sep 29, 2016 9:23 am
Posts: 547
Location: Pontoon Beach IL
I have Only 2 screws in mine, they are half way from top and bottom, one on the left side, one on the right....

_________________
Current:
2000 Sea Ray 380 Sundancer "still Livin the Dream"

Past
2002 268 Vista 5.7 GXI "Livin' the Dream"
1996 Rinker 192 Captiva. "The Simple Life"
1999 Yamaha XLL 1200 Waverunner.
1976 Mercury Marquis tri hull 120 hp


Top
 Profile  
 
PostPosted: Sun Aug 05, 2018 7:38 am 
Offline
Livin' the Dream
User avatar

Joined: Thu Sep 29, 2016 9:23 am
Posts: 547
Location: Pontoon Beach IL
If I remember Correctly, I slid Some cardboard at the top between the ceiling and the top of the board. Then I took A piece of pencil wire, maybe 3/16” diameter, pent a 90 degree hook on it, maybe 2” long, then slid in, twisted, and used that to pull the board straight out....

_________________
Current:
2000 Sea Ray 380 Sundancer "still Livin the Dream"

Past
2002 268 Vista 5.7 GXI "Livin' the Dream"
1996 Rinker 192 Captiva. "The Simple Life"
1999 Yamaha XLL 1200 Waverunner.
1976 Mercury Marquis tri hull 120 hp


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group