www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
water leak 248 vista 2001 https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=16044 |
Page 1 of 1 |
Author: | Rick2752 [ Sun Jul 08, 2018 10:24 am ] |
Post subject: | water leak 248 vista 2001 |
I am getting water in my aft cabin cabinets. I don't have air conditioning so they are just storage. Anyone have this issue before? The only area I can see that could be doing it is the drain beside the cuddy door. I cant figure out how to get to that pipe. Thanks Rick |
Author: | Rick2752 [ Tue Jul 31, 2018 4:40 pm ] |
Post subject: | Re: water leak 248 vista 2001 |
I couldn’t get that back panel out. I don’t know if they recarpeted it or what. I can get to the bottom screws in the panel. I’ve had the other side out no issues but couldn’t get that side out. Any tips? |
Author: | chris268 [ Tue Jul 31, 2018 4:53 pm ] |
Post subject: | Re: water leak 248 vista 2001 |
On mine, I slid Some thin cardboard between the vinyl on the ceiling and the top of the back plate. It’s tight for sure. I fought It. The ceiling of the locker has formed around mine.... may want to slide some card board at the bottom too. I used Thin stuff, like what separates the top and bottom section of a cube of Pepsi.... or 30 pack of beer |
Author: | Rick2752 [ Sat Aug 04, 2018 6:27 am ] |
Post subject: | Re: water leak 248 vista 2001 |
Did you guys take out carpet on bottom. That’s my issue. I can’t get to the two bottom screws |
Author: | chris268 [ Sat Aug 04, 2018 5:44 pm ] |
Post subject: | Re: water leak 248 vista 2001 |
I have Only 2 screws in mine, they are half way from top and bottom, one on the left side, one on the right.... |
Author: | chris268 [ Sun Aug 05, 2018 7:38 am ] |
Post subject: | Re: water leak 248 vista 2001 |
If I remember Correctly, I slid Some cardboard at the top between the ceiling and the top of the board. Then I took A piece of pencil wire, maybe 3/16” diameter, pent a 90 degree hook on it, maybe 2” long, then slid in, twisted, and used that to pull the board straight out.... |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |