| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Round Hatch Sunshades https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=16058 |
Page 1 of 1 |
| Author: | LUBA [ Fri Jul 13, 2018 12:55 pm ] |
| Post subject: | Round Hatch Sunshades |
Do they make a sunshade for the round Lewmar hatches? How do you guys darken cabin? |
|
| Author: | chris268 [ Fri Jul 13, 2018 3:34 pm ] |
| Post subject: | Re: Round Hatch Sunshades |
Following |
|
| Author: | Thalasso [ Fri Jul 13, 2018 4:44 pm ] |
| Post subject: | Re: Round Hatch Sunshades |
What size? http://fan9.coconutbeachresorts.com/ind ... atch+round |
|
| Author: | chris268 [ Mon Jul 16, 2018 9:27 am ] |
| Post subject: | Re: Round Hatch Sunshades |
I have a 20” factory bomar hatch on my 2002. My screen has seen better days. Looking for a solution to replace/repair it |
|
| Author: | Justhavenfun [ Mon Jul 16, 2018 6:51 pm ] |
| Post subject: | Re: Round Hatch Sunshades |
For now we cut a circle out of black poster board and the screen holds it in place |
|
| Author: | babbot1 [ Tue Jul 24, 2018 7:07 am ] |
| Post subject: | Re: Round Hatch Sunshades |
Justhavenfun wrote: For now we cut a circle out of black poster board and the screen holds it in place We did a similar thing with a piece of cardboard, the cardboard was cut oversized so it will kinda stay in place and the screen locks it in. Been doing the same thing for years. I hate it but it works. My boat neighbor has a square hatch so on the outside he was able to snap in a piece of canvas on top. I was thinking of trying the same thing but with the round hatch I don't think it will be easy or look right. My other idea was velcro on the inside of the hatch with a piece of canvas. That's probably the easiest and shouldn't look too terrible if the velcro is placed okay. |
|
| Author: | babbot1 [ Wed Jul 25, 2018 9:00 am ] |
| Post subject: | Re: Round Hatch Sunshades |
YYZ-RC wrote: Previous owner of my boat had a 1" thick round "cushion" made out of canvas. It sandwiches against the glass and above the piston that holds the hatch open, friction fit. A bit less ugly than cardboard. HA! we have the fancy cardboard. LOL! it's a piece I cut from a box that was white so it doesn't look 1/2 bad but still hack. The "cushion" is a good idea. Shouldn't be to hard to sew together. I have been learning on my Grandmothers machine and made a windshield shade on our Flybridge. Came out pretty well for first attempt. The canvas shops around me are crazy busy. I can't get anyone to redo my bridge enclosure. And the one place that called me back said I would be about 1 year out on the list. Been thinking of starting my own side business. LOL! |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|