www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Sat May 03, 2025 7:34 pm

View unanswered posts | View active topics


Board index » Four Winns Models » Cruiser - Vista

All times are UTC - 6 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
cigarman
 Post subject: Radar Arch air bubbles
PostPosted: Sun Mar 09, 2008 11:29 am 
Offline
Minnow

Joined: Thu May 18, 2006 7:36 am
Posts: 19
Location: Delray Beach, Florida
I have a 2005 Vista 288 with the alum. radar arch. I have started to notice air bubbles forming underneath the paint on the top of the arch and smaller bubbles where the arch attaches to the hull. What is the recommended repair for this situation???
Top
 Profile  
 
LTC, USA, RET
PostPosted: Sun May 24, 2009 7:12 pm 
Offline
Clownfish
User avatar

Joined: Tue May 12, 2009 12:39 pm
Posts: 49
I have a 2005 298 and have the same problem. I will be curious to see what remedies have been made/will be recommended.

_________________
Stacy & Isora in Annapolis, MD
2005 Vista 298
Top
 Profile  
 
Brett248Vista
PostPosted: Sun May 24, 2009 8:27 pm 
Offline
The Real Dr.Evil
User avatar

Joined: Sun Apr 22, 2007 9:35 am
Posts: 1004
Location: Greensburg PA
Since they are aluminum they are most likely powder coated. They would have to be chemically or abrasive stripped and re powder coated in the correct color.

_________________
Brett DiMichele
Top
 Profile  
 
planealternative
PostPosted: Mon May 25, 2009 8:45 pm 
Offline
email admin your custom rank

Joined: Sun Jul 16, 2006 1:51 pm
Posts: 256
Location: Ontario, Canada
LTC, USA, RET wrote:
I have a 2005 298 and have the same problem. I will be curious to see what remedies have been made/will be recommended.


You have an aluminum arch on your 298?? :? I thought they were all fiberglass.

_________________
Image
"ROCKHOUND"
2005 Vista 298
Georgian Bay, Ontario.
Top
 Profile  
 
LTC, USA, RET
PostPosted: Tue May 26, 2009 6:24 am 
Offline
Clownfish
User avatar

Joined: Tue May 12, 2009 12:39 pm
Posts: 49
your are correct. I have a fiberglass arch too. But... the center access cover and speaker mounts are aluminum and all are peeling.

_________________
Stacy & Isora in Annapolis, MD
2005 Vista 298
Top
 Profile  
 
planealternative
PostPosted: Tue May 26, 2009 12:29 pm 
Offline
email admin your custom rank

Joined: Sun Jul 16, 2006 1:51 pm
Posts: 256
Location: Ontario, Canada
Sounds like poor paint adhesion in the first place. Maybe they had a problem with the primer. The only way to repair it properly would be to sandblast or beadblast down to raw metal, prime with the proper primer and repaint.

_________________
Image
"ROCKHOUND"
2005 Vista 298
Georgian Bay, Ontario.
Top
 Profile  
 
mar1ner
PostPosted: Tue May 26, 2009 9:34 pm 
Offline
Clownfish

Joined: Tue Mar 18, 2008 2:10 pm
Posts: 40
Location: Woodbridge, VA
I just noticed the same bubbles at the bottom of the aluminium arch on my 378. I would be curious how many others have found the same problem.

_________________
Jerry
2004 378 Vista "Escapade", T-Mercruiser 8.1 SHO
2003 Maxum 3300SE
1987 Wellcraft San Tropez
1991 Chaparral 2550SX
1987 Bayliner 2150
!967 Caravelle 1751
Top
 Profile  
 
slimdem
PostPosted: Wed Jun 03, 2009 12:51 am 
Offline
Tadpole

Joined: Mon Nov 12, 2007 9:38 pm
Posts: 2
I have the same problem on my 05 298. It has an aluminium arch and I have been told it would need to be removed for repair. Approx cost $1,000 Australian. Cheers from downunder, slimdem
Top
 Profile  
 
bndfishing
PostPosted: Wed Jun 03, 2009 6:25 pm 
Offline
email admin your custom rank
User avatar

Joined: Sat Sep 06, 2008 10:15 pm
Posts: 239
Location: St. Helens Oregon
Welcome to aluminum, paint, water, and time. Here in the NW we have lots of aluminum boat that are painted, just about everyone of them has bubbles in the paint. As you get electrolysis under the paint the gas that is let off bubbles the paint. Poke the bubbles and release the gas so it doesn't keep expanding.

_________________
2000 268 Vista "Reely Nauti"
http://www.facebook.com/#!/rivercruiser
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Board index » Four Winns Models » Cruiser - Vista

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 36 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group