www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

Ebay - Tank Watch and Macerator Auctions
https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=1675
Page 1 of 1

Author:  billcruise [ Sat Mar 29, 2008 7:17 am ]
Post subject:  Ebay - Tank Watch and Macerator Auctions

I am running two auctions ending this weekend that may be of interest to many here. One is for a Tank Watch waste and water system level monitoring system:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=230235211049&ssPageName=ADME:X:AAQ:MOTORS:1123

http://cgi.ebay.com/ebaymotors/ws/eBayI ... OTORS:1123

The other auction is for a Four Winns OEM 2003 328 Vista Macerator and related hoses:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=230235055534&ssPageName=ADME:X:AAQ:MOTORS:1123

http://cgi.ebay.com/ebaymotors/ws/eBayI ... OTORS:1123

Author:  wkearney99 [ Sat Mar 29, 2008 7:27 am ]
Post subject:  Re: Ebay - Tank Watch and Macerator Auctions

So you removed your whole waste tank setup? Or just the overboard macerator? Our 348 didn't come with the macerator option (not that we could ever use it either).

I installed that tank watch setup on our 348, in replacement of the miserable Xintex setup. It worked well the tail end of last season. I opted to do a flange based install instead of the there separate rubber press-fit style. Installing the flange was a pain in the ass. But I feel a little better knowing there's a mechanical seal instead of the pressure-fit.

Author:  billcruise [ Sat Mar 29, 2008 12:45 pm ]
Post subject:  Re: Ebay - Tank Watch and Macerator Auctions

Just removed the macerator. Seemed like it was always in the way with engine maintenance and since I couldn't use it, I decided life was simpler with it removed. Other reason I removed it is I was able to install a rubbermaid 24" sqare tote to store a variety of things.

I also removed the Xintex sensors since they never worked and opted for the Snake River. No complaints with it and I suspect the Tank Watch is just as good since Four Winns was going that way for their OEM system.

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/