| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| After Market Parts https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=1903 |
Page 1 of 1 |
| Author: | rcarriere [ Sun May 18, 2008 8:08 am ] |
| Post subject: | After Market Parts |
Does anyone have a dealer that would carry aftermarket parts? I am looking for: Cabin Seats - Back Bench Dashboad Gauges Switches All help would be greatly appreciated. |
|
| Author: | wkearney99 [ Sun May 18, 2008 9:33 am ] |
| Post subject: | Re: After Market Parts |
Complete seats and dash panels are only going to come from the factory. That said, you can certainly have an upholstery shop make new seating. And find a fabricator to make a new dash panel (it's often just marine plywood with gelcoat on it). Faria is one gauge maker, others exist. For analog sensors there are plenty of vendors that make gauges. Same deal with switches. |
|
| Author: | LouC [ Sun May 18, 2008 5:58 pm ] |
| Post subject: | Re: After Market Parts |
I had to replace the helm seats and rear seat in my 88 Four Winns 200 Horizon, and I would up buying Wise pontoon seats for both, nice captain's chairs for the helm and 2 36" pontoon boat seats which fit perfectly in the space for the rear seat. The guy who re-did my bow cushions told me that it was actually cheaper to go that way, he'd charge more than the prices that I paid for the Wise seating. I've had them a while now and the quality is quite good. Check out an Overtons' or West Marine catalog, look in the pontoon section if you need bench seats of various widths. |
|
| Author: | rcarriere [ Mon May 19, 2008 7:00 am ] |
| Post subject: | Re: After Market Parts |
Thank you both for the info as it is greatly appreciated. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|