www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
248 Vista Beeping alarm https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=19303 |
Page 1 of 1 |
Author: | Trevb54 [ Sat Jan 19, 2019 7:54 pm ] |
Post subject: | 248 Vista Beeping alarm |
I have a beeping alarm which has started recently that seems to go away when I increase the speed. If I turn on the ignition without starting the engine it starts beeping. When I came into the dock yesterday I had slowed to idle and after a couple of minutes it started beeping again. At first I thought it might be low fuel but I filled the tank and it made no difference. I'm a little knew to this so would appreciate any ideas you might have. ![]() I've also noticed that the speedo is not working would that have something to do with it? |
Author: | Graham R [ Sun Jan 20, 2019 1:09 pm ] |
Post subject: | Re: 248 Vista Beeping alarm |
My guess would be low oil pressure or an oil pressure sensor. What does the oil pressure gauge indicate? |
Author: | chevymaher [ Sun Jan 20, 2019 1:44 pm ] |
Post subject: | Re: 248 Vista Beeping alarm |
Depth finders do what your talking about. How deep is the alarm set for that? |
Author: | Trevb54 [ Tue Jan 22, 2019 1:45 pm ] |
Post subject: | Re: 248 Vista Beeping alarm |
Turned out to be the Drive pump reservoir was very low, (empty). Thanks guys. Now to the speedometer? |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |