vacday wrote:
Thanks for the info and saving us hundreds of dollars.
That's outstanding news! Glad it was an easy (and cheap) fix.
But I do have a concern about the 'hard wiring' fix. I'm assuming that means he soldered them? It's generally not a good idea to solder connections on a boat. Mainly because a soldered connection tends to be too stiff. This leads to the connection getting broken faster than one just using crimped terminals. That and a loose connection means risk of sparks. On gasoline boats this is a no-no. I don't want to be a worry-wort about it because it'll likely hold just fine if the wires are properly supported. At least for the duration of the season. Then there will be time to get it fixed right. But this, again, assumes you're talking soldered connections. It's entirely possible he just crimped a couple new terminals right onto the wire and tossed out the old plastic plugs on the old wiring. That'd be fine.
Regardless, any time a boat repair can be called 'inexpensive' it's a success.