www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

V248 - looking for replacement parts
https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=23394		 Page 1 of 1
Author:  robfichtel [ Thu Jun 20, 2019 11:02 am ]
Post subject:  V248 - looking for replacement parts
Just completing the purchase of a 2006 V248 and am looking for parts - deck pad (missing) , steering wheel, and instrument panel (faded by the sun). I can see the parts on the Four Winns Catalog site but am not able to order anything. I've read that I should contact a Four Winns dealer. Any other suggestions?
Author:  firecadet613 [ Thu Jun 20, 2019 7:38 pm ]
Post subject:  Re: V248 - looking for replacement parts
Melvin Village Marine, in NH. They can drop ship parts direct to you from FW. They are my usual go to for Four Winns parts and I'm in Indiana.
Author:  robfichtel [ Fri Jun 21, 2019 2:13 am ]
Post subject:  Re: V248 - looking for replacement parts
Thanks!
Author:  njboater [ Fri Jun 21, 2019 12:06 pm ]
Post subject:  Re: V248 - looking for replacement parts
Horizon Marine in NJ always was very helpful. I got most my FW replacement parts from them.
Author:  babbot1 [ Fri Jun 21, 2019 1:16 pm ]
Post subject:  Re: V248 - looking for replacement parts
Most "parts" are not made by Four Winns but other manufactures. You can usually get most stuff aftermarket unless its something very specific. A prime example is the steering wheel which is probably a universal part.
I noticed most hardware and the pumps on our 2008 were attwood brand. My gauges were Faria gauges but the panel itself was probably custom plastic :D
The dealer might help you find out who made the part for easier tracking.
Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/