Go direct to Taylor Made. I bought some for my 358 last fall and have quite a bit left over. A bit pricey, but well worth it!
https://www.taylormadeproducts.com/hard ... s3hD7mILHo
| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Exterior window trim https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=23521 |
Page 1 of 1 |
| Author: | Guinnydog [ Sun May 03, 2020 1:05 pm ] |
| Post subject: | Exterior window trim |
Looking for a supplier for the exterior window trim or may be referred to as glazing channel trim. Covers the window mounting screws on the exterior of the window and fits into the aluminum window frame. Web search did not result in the exact replacement. A few sections on my boat have shrunk. Trying to load photos from Photobucket but not letting. Think they want money now. Are people moving away from Photobucket, and if so, what is the preferred. |
|
| Author: | firecadet613 [ Sun May 03, 2020 2:42 pm ] |
| Post subject: | Re: Exterior window trim |
Go direct to Taylor Made. I bought some for my 358 last fall and have quite a bit left over. A bit pricey, but well worth it! https://www.taylormadeproducts.com/hard ... s3hD7mILHo
|
|
| Author: | Guinnydog [ Sun May 03, 2020 3:07 pm ] |
| Post subject: | Re: Exterior window trim |
Thanks so much!!! firecadet613 That appears to be the correct trim. Part# 41100024 looks the same as the trim on my boat but will have to compare the measurement specs. The part number you quoted looks a little different but that could be what FW used on the 358. Did you purchase a roll or a specific length? What photo platform are you using to upload pictures? |
|
| Author: | firecadet613 [ Sun May 03, 2020 3:13 pm ] |
| Post subject: | Re: Exterior window trim |
Guinnydog wrote: Thanks so much!!! firecadet613 That appears to be the correct trim. Part# 41100024 looks the same as the trim on my boat but will have to compare the measurement specs. The part number you quoted looks a little different but that could be what FW used on the 358. Did you purchase a roll or a specific length? What photo platform are you using to upload pictures? Good call - here is what the Four Winns Parts Book lists for the 2010 285. "EXTRUSION, SCREW CVR TAY W/S 01 41100024", https://parts.fwdealer.com/ I just measured out what I needed to redo the entire boat and bought that amount. Looking back, I could have gone with a bit less - I tok the longest pieces and moved them to the smaller areas and just trimmed the excess. For photo hosting I now use imgur.com |
|
| Author: | Guinnydog [ Sun May 03, 2020 3:22 pm ] |
| Post subject: | Re: Exterior window trim |
Thanks again!! |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|