www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Thu Mar 28, 2024 2:05 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Exterior window trim
PostPosted: Sun May 03, 2020 1:05 pm 
Offline
email admin your custom rank

Joined: Sun Jun 11, 2006 10:17 pm
Posts: 169
Location: Vancouver, British Columbia
Looking for a supplier for the exterior window trim or may be referred to as glazing channel trim. Covers the window mounting screws on the exterior of the window and fits into the aluminum window frame. Web search did not result in the exact replacement. A few sections on my boat have shrunk.

Trying to load photos from Photobucket but not letting. Think they want money now. Are people moving away from Photobucket, and if so, what is the preferred.

_________________
Image
2010 278 Vista
5.7 GXi DP

Past:
1999 225 Sundowner
5.7 GSi SX


Top
 Profile  
 
 Post subject: Re: Exterior window trim
PostPosted: Sun May 03, 2020 2:42 pm 
Offline
email admin your custom rank

Joined: Thu Jul 13, 2006 7:45 pm
Posts: 2866
Location: Indiana
Go direct to Taylor Made. I bought some for my 358 last fall and have quite a bit left over. A bit pricey, but well worth it!

https://www.taylormadeproducts.com/hard ... s3hD7mILHo

Image

Image

_________________
2007 358 T-5.7GXi IB
Previous Boats
'08 H240, '08 V318, '04 268, '04 225


Top
 Profile  
 
 Post subject: Re: Exterior window trim
PostPosted: Sun May 03, 2020 3:07 pm 
Offline
email admin your custom rank

Joined: Sun Jun 11, 2006 10:17 pm
Posts: 169
Location: Vancouver, British Columbia
Thanks so much!!! firecadet613

That appears to be the correct trim. Part# 41100024 looks the same as the trim on my boat but will have to compare the measurement specs. The part number you quoted looks a little different but that could be what FW used on the 358. Did you purchase a roll or a specific length?

What photo platform are you using to upload pictures?

_________________
Image
2010 278 Vista
5.7 GXi DP

Past:
1999 225 Sundowner
5.7 GSi SX


Top
 Profile  
 
 Post subject: Re: Exterior window trim
PostPosted: Sun May 03, 2020 3:13 pm 
Offline
email admin your custom rank

Joined: Thu Jul 13, 2006 7:45 pm
Posts: 2866
Location: Indiana
Guinnydog wrote:
Thanks so much!!! firecadet613

That appears to be the correct trim. Part# 41100024 looks the same as the trim on my boat but will have to compare the measurement specs. The part number you quoted looks a little different but that could be what FW used on the 358. Did you purchase a roll or a specific length?

What photo platform are you using to upload pictures?


Good call - here is what the Four Winns Parts Book lists for the 2010 285. "EXTRUSION, SCREW CVR TAY W/S 01 41100024", https://parts.fwdealer.com/

I just measured out what I needed to redo the entire boat and bought that amount. Looking back, I could have gone with a bit less - I tok the longest pieces and moved them to the smaller areas and just trimmed the excess.

For photo hosting I now use imgur.com

_________________
2007 358 T-5.7GXi IB
Previous Boats
'08 H240, '08 V318, '04 268, '04 225


Top
 Profile  
 
 Post subject: Re: Exterior window trim
PostPosted: Sun May 03, 2020 3:22 pm 
Offline
email admin your custom rank

Joined: Sun Jun 11, 2006 10:17 pm
Posts: 169
Location: Vancouver, British Columbia
Thanks again!!

_________________
Image
2010 278 Vista
5.7 GXi DP

Past:
1999 225 Sundowner
5.7 GSi SX


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group