www.iFourWinns.com • View topic - 2006 348 vista

View unanswered posts | View active topics

Board index » Four Winns Models » Cruiser - Vista

All times are UTC - 6 hours [ DST ]

2006 348 vista - bilge flow

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

Razyl2024

Post subject: 2006 348 vista - bilge flow

Posted: Tue Aug 20, 2024 12:26 pm

Tadpole

Joined: Mon Aug 19, 2024 11:10 am
Posts: 4

After cleaning the bilge in the aft cabin where A/C and generator through hulls are; I find oil in that bilge. There is an oil leak in the starboard engine.
My question is: Is there a connection between the two bilge areas that allow water & oil to flow back into the aft cabin bilge. and should such a flow be sealed or left open?

_________________
2006 Vista 348
Twin MX 6.2L MPI Horizon MIE

Top

Surface Interval

Post subject: Re: 2006 348 vista - bilge flow

Posted: Thu Aug 22, 2024 6:14 pm

email admin your custom rank

Joined: Sun May 20, 2012 4:31 pm
Posts: 876
Location: Titusville, Florida

I believe that the aft cabin bilge area is open to the engine compartment bilge. The aft and forward bilge areas should be separated by the bulkhead at the front edge of the aft cabin. That is how my 268 is, and that is how it appears to me in the owners manuals for the 348.

_________________
Surface Interval: A scuba diving term for that time between dives to relax and prepare for life's next great adventure.

Current boat: '02 FW 268 Vista
Previous boat: '95 FW 190 Horizon

Top

Page 1 of 1

[ 2 posts ]

Board index » Four Winns Models » Cruiser - Vista

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 10 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum