www.iFourWinns.com • View topic

View unanswered posts | View active topics

Board index » Four Winns Models » Cruiser - Vista

All times are UTC - 6 hours [ DST ]

Removing the dash

Page 1 of 1

[ 3 posts ]

Print view

Previous topic | Next topic

Author

Message

rmorrison9773

Post subject: Removing the dash

Posted: Mon Apr 20, 2009 11:49 am

Guppy

Joined: Mon Apr 20, 2009 6:57 am
Posts: 6

I need to remove the dash panel on my 02 268 Vista to install a new VHF to replace the failed Ray Jeff that came with the boat. I would thing I need to remove the wheel but I have never done it before. Your help is appreciated.

Top

mkivbren

Post subject: Re: Removing the dash

Posted: Mon Apr 20, 2009 1:58 pm

AGE < LOA

Joined: Tue Mar 13, 2007 8:53 pm
Posts: 739

It's very easy and you likely don't need to totally remove it - just pull it back enough so you can mount the new vhf and run or tie into existing wire. Just unbolt the steering wheel and then unscrew the dash. Feed the rubber boot on the steering column through the panel and just work the panel on the column so that you can get it around the tilt tab. Then you should have plenty of room to work.

_________________
V475
Chris Craft Catalina 23 w/ 300 G2
Previously-V338, 248 Vista, H210

Top

jmikula

Post subject: Re: Removing the dash

Posted: Thu Apr 23, 2009 7:37 pm

Shark

Joined: Thu Jun 29, 2006 3:03 pm
Posts: 112

Its a piece of cake.. I am in my dash EVERY YEAR for one reason or another... And there is PLENTY of room.

_________________
2000 Four Winns 248 Vista (Nice toys, no Air)
2001 Highly Modified Yamaha GP1200R (75+MPH)

Top

Page 1 of 1

[ 3 posts ]

Board index » Four Winns Models » Cruiser - Vista

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 45 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum