| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Headliner keeps coming down. https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=3409 |
Page 1 of 1 |
| Author: | woggy718 [ Mon May 04, 2009 7:07 am ] |
| Post subject: | Headliner keeps coming down. |
In our 248, the headliner that goes from the entrance to just past the head keeps coming down. I keep pushing it against the velcro tabs, but it keeps falling down. Anyone else have this problem and if so, how did you fix it? |
|
| Author: | captwalt [ Mon May 04, 2009 7:10 am ] |
| Post subject: | Re: Headliner keeps coming down. |
Hi Woggy! Its a known problem. I solved it with screws. Got the fancy little plastic covers for the screws. Can't even tell it is there. Couldn't be happier. |
|
| Author: | jmikula [ Wed May 06, 2009 8:44 am ] |
| Post subject: | Re: Headliner keeps coming down. |
FYI, this is a problem with almost ALL 248's.. Mine was no exception.. I took it back to the dealer when I had the issue and FW told him to use the little screws and white caps as well.. Mine look like this:http://www.westmarine.com/webapp/wcs/stores/servlet/producte/10001/-1/10001/299186?&cid=chanintel&ci_src=14110944&ci_sku=299186#: |
|
| Author: | SoonerBoater [ Wed May 13, 2009 2:49 pm ] |
| Post subject: | Re: Headliner keeps coming down. |
I've got a droopy headliner in my aft cabin. I presume its the same basically as the 248. I see the link to the screw caps, but what kind of screw is used? |
|
| Author: | sniper222 [ Fri May 15, 2009 8:28 pm ] |
| Post subject: | Re: Headliner keeps coming down. |
You would use a small 1/4 inch stainless screw. Will depend on the screw cap you use. |
|
| Author: | SoonerBoater [ Sat May 16, 2009 9:47 pm ] |
| Post subject: | Re: Headliner keeps coming down. |
Thanks! Got a reason to go to the hardware store now! |
|
| Author: | powellcrazy [ Mon May 18, 2009 6:47 am ] |
| Post subject: | Re: Headliner keeps coming down. |
We had to screw our headliner back up a couple years ago, used the same caps from west marine as posted above. Worked great. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|