If you mean the formica covered plywood board that fills in the V to make it into a berth, check under your mid cabin cushions, that's about the ONLY place on the boat you can store it
| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| 268 forward v-berth fillin? Where is it? https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=3665 |
Page 1 of 2 |
| Author: | sergtech [ Mon Jun 01, 2009 3:35 pm ] |
| Post subject: | 268 forward v-berth fillin? Where is it? |
This being a used boat. It may not be in the boat. Where is it normally stored. Or Can I order this somewhere? I'd like to use the v-berth to sleep. |
|
| Author: | Cap'n Morgan [ Mon Jun 01, 2009 3:49 pm ] |
| Post subject: | Re: 268 forward v-berth fillin? Where is it? |
You mean the wood/formica insert that fits between the two benches in the V-berth ? |
|
| Author: | Brett248Vista [ Mon Jun 01, 2009 3:59 pm ] |
| Post subject: | Re: 268 forward v-berth fillin? Where is it? |
If you mean the formica covered plywood board that fills in the V to make it into a berth, check under your mid cabin cushions, that's about the ONLY place on the boat you can store it
|
|
| Author: | sergtech [ Mon Jun 01, 2009 4:06 pm ] |
| Post subject: | Re: 268 forward v-berth fillin? Where is it? |
Yes that. I scoured the boat. I guess I have it. Does that board need a stand to? dont |
|
| Author: | Cap'n Morgan [ Mon Jun 01, 2009 4:19 pm ] |
| Post subject: | Re: 268 forward v-berth fillin? Where is it? |
sergtech wrote: Yes that. I scoured the boat. I guess I have it. Does that board need a stand to? dont No, it fits between the two benches. Nothing else needed.Except the cushions. |
|
| Author: | sergtech [ Mon Jun 01, 2009 4:32 pm ] |
| Post subject: | Re: 268 forward v-berth fillin? Where is it? |
Thanks. Guess I'm calling a four winns parts reseller/dealer. |
|
| Author: | Cap'n Morgan [ Mon Jun 01, 2009 5:39 pm ] |
| Post subject: | Re: 268 forward v-berth fillin? Where is it? |
sergtech wrote: Yes that. I scoured the boat. I guess I have it. So you did not find it?, and you do not have it? |
|
| Author: | powellcrazy [ Mon Jun 01, 2009 6:06 pm ] |
| Post subject: | Re: 268 forward v-berth fillin? Where is it? |
sergtech wrote: Yes that. I scoured the boat. I guess I have it. So you did not find it?, and you do not have it? sergtech wrote: Yes that. I scoured the boat. I guess I have it. Does that board need a stand to? dont  So you found it and are good to go
|
|
| Author: | Cap'n Morgan [ Mon Jun 01, 2009 6:32 pm ] |
| Post subject: | Re: 268 forward v-berth fillin? Where is it? |
sergtech wrote: Thanks. Guess I'm calling a four winns parts reseller/dealer. To tell them you have it? or.... To tell them you don't ?
|
|
| Author: | bndfishing [ Mon Jun 01, 2009 7:35 pm ] |
| Post subject: | Re: 268 forward v-berth fillin? Where is it? |
I thought the table dropped down and filled in the spot, or at least that is what we do. |
|
| Author: | Flyer51 [ Mon Jun 01, 2009 8:51 pm ] |
| Post subject: | Re: 268 forward v-berth fillin? Where is it? |
Mine is on the starboard wall in the aft berth held by two brackets. I'm still confused did you find yours? 
|
|
| Author: | sergtech [ Wed Jun 03, 2009 6:49 pm ] |
| Post subject: | Re: 268 forward v-berth fillin? Where is it? |
Sorry, sorry guys. Typo. I did NOT find it. So I called my local Four Winns dealer (rip-off artists). They want $140 shipped! For a piece of plywood or what ever. NOT! Our table would not work. It's the wood model that is kinda square. It would not fit. That price can't be right. I found it on the parts catalog. Looks like a cheap Laminated plywood. I may just make one from home depot parts for 5 bucks. I would just need to trace someone else's
|
|
| Author: | powellcrazy [ Wed Jun 03, 2009 7:41 pm ] |
| Post subject: | Re: 268 forward v-berth fillin? Where is it? |
sergtech wrote: Our table would not work. It's the wood model that is kinda square. It would not fit. That price can't be right. I found it on the parts catalog. Looks like a cheap Laminated plywood. I may just make one from home depot parts for 5 bucks. I would just need to trace someone else's Yes, that is all it is, cheap plywood, covered with laminate. I would let you borrow mine to trace, where you located?? If you not by me, I am sure someone by you will help out. If not, just take a big piece of cardboard to make a pattern. when done sand it well, couple thick coats of good paint, should be good to go. May I also suggest you make a signature and/or fill out your profile so we all know a little about who and where you are. |
|
| Author: | Brett248Vista [ Wed Jun 03, 2009 8:35 pm ] |
| Post subject: | Re: 268 forward v-berth fillin? Where is it? |
A sheet of void free birch and some pour on catylized urethane and you are golden! No veneer needed. |
|
| Author: | sergtech [ Wed Jun 03, 2009 11:21 pm ] |
| Post subject: | Re: 268 forward v-berth fillin? Where is it? |
Thanks for the advice once again. I'm going with the cardboard cut out and a nice piece of wood from the depot. Sorry for the lack of info. I belong to to many boards as it is and I try to limit the amount of personal info I divulge online these days. I can say I can say a few things. You all can call me Serg. I live in Fort Worth Texas. And I am in network security. Oh did I mention I love my boat? |
|
| Page 1 of 2 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|