| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| High water/temp/oil alarm https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=3974 |
Page 1 of 1 |
| Author: | firecadet613 [ Mon Jul 06, 2009 10:22 pm ] |
| Post subject: | High water/temp/oil alarm |
The surveyor said this wasn't working on the boat I'm looking at purchasing. On my 225 Sundowner, a loud beep happens when you turn the key into the on position, and then thats it. If you leave the key on, the alarm doesn't sound. My wife said on this 268 it didn't seem as loud as our 225, but it did make that loud beep. Is that all it is supposed to do? The surveyor seemed to say it should stay on until the engine starts, because of no oil PSI...... |
|
| Author: | bndfishing [ Mon Jul 06, 2009 10:31 pm ] |
| Post subject: | Re: High water/temp/oil alarm |
my 268 is the same way I turn the key on until the beep stops then start it. I think the initial beep is just a systems check. |
|
| Author: | Graham R [ Tue Jul 07, 2009 4:39 am ] |
| Post subject: | Re: High water/temp/oil alarm |
I actually get 2 beeps on my boat when I turn the ignition on ! It is just a check. Graham |
|
| Author: | firecadet613 [ Tue Jul 07, 2009 5:53 am ] |
| Post subject: | Re: High water/temp/oil alarm |
Thanks guys. If I remember I'll check this on my 225 before I haul it over to its new owner, but my wife remembers the 268 sounds just like the 225 did. |
|
| Author: | 9BALL [ Tue Jul 07, 2009 3:16 pm ] |
| Post subject: | Re: High water/temp/oil alarm |
firecadet613 wrote: Thanks guys. If I remember I'll check this on my 225 before I haul it over to its new owner, but my wife remembers the 268 sounds just like the 225 did. If it starts beeping continuosly it is an alarm for low gear lube monitor level, if it just alarms steady it's low oil pressure. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|