| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Fill Trim Tab Resivor https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=4076 |
Page 1 of 1 |
| Author: | ohiolakerat [ Thu Jul 16, 2009 8:18 am ] |
| Post subject: | Fill Trim Tab Resivor |
Hey Guys, I need to add some fluid to my trim tabs. I've found the fill cap but the hole is very small and I can't seem to get a funnel small enough. Is there a trick to this? Boat is a 2000 248 Vista. Thanks, |
|
| Author: | mcraigchr [ Thu Jul 16, 2009 9:23 am ] |
| Post subject: | Re: Fill Trim Tab Resivor |
ohiolakerat wrote: Hey Guys, I need to add some fluid to my trim tabs. I've found the fill cap but the hole is very small and I can't seem to get a funnel small enough. Is there a trick to this? Boat is a 2000 248 Vista. Thanks, Not sure on the trim tabs as I have not added any fluid to this point. However, I have a home-grown tool that I think would work for you ... and it's nice to have for other jobs, like flushing out your A/C condensate line (bleach). Pick up a horse syringe (big needle) from a ranch/farm/pet supply store. If you don't have one of these places near you, you can go to the grocery store and pickup a "Tony Chachere Injector Kit" ... or some other brand. (This is for injecting turkey, chicken, etc. It comes with a syringe). This will likely be enough to accomplish what you want. However, to make this a good tool for other hard to reach tasks, pickup some 1/8, 3/16 or 1/4 inch clear flexible tubing to slip over the needle. You can get into some mighty tight places to flush and fill. Craig C. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|