| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| 2000 248 vista prop wrench https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=4748 |
Page 1 of 1 |
| Author: | sachem29 [ Sun Oct 25, 2009 7:39 pm ] |
| Post subject: | 2000 248 vista prop wrench |
Does anyone know where I can get a prop wrench or socket without going on the volvo web site where it costs 80-100 dollars. I'm looking for a wrench or sockets to fit a 2000 volvo 5.0gsi duo prop. I would like to take the aft prop off to change the lower unit oil. |
|
| Author: | firecadet613 [ Sun Oct 25, 2009 8:17 pm ] |
| Post subject: | Re: 2000 248 vista prop wrench |
http://cgi.ebay.com/ebaymotors/VOLVO-PE ... iesQ5fGear Is what I have, although I think they dropped the price from when I bought it last year. |
|
| Author: | powellcrazy [ Sun Oct 25, 2009 9:33 pm ] |
| Post subject: | Re: 2000 248 vista prop wrench |
I paid $28 ish for a volvo wrench at my local FW dealer. Identical to the one in the ebay link above |
|
| Author: | beyond the blue [ Mon Oct 26, 2009 3:00 am ] |
| Post subject: | Re: 2000 248 vista prop wrench |
If you're a bit handy Graham R posted this on making one. I intend doing it myself someday................ The standard rear nut is 30mm. I made my own tool for the forward nut from a piece of standard 2" steel pipe ( schedule 40 grade, which has an OD of 2.375" and wall thickness of 0.154"). The nut is actually 52mm diameter, (with three 5mm wide protrusions 120 degrees apart), so the pipe is a perfect ID for the diameter of the nut ( and is very robust). I've welded a plate and captive bolt to the other end of the tube, so I can use a torque wrench when refitting the forward prop. Graham |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|