www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

Maxwell Windlass Pics?
https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=4818		 Page 1 of 1
Author:  acguy [ Sun Nov 15, 2009 7:52 am ]
Post subject:  Maxwell Windlass Pics?
Hello All

I just purchased a Maxwell Freedom windlass and am woundering if anyone has any pics of one that is installed. I am installing it on my 2000 248 hope it fits!

Thanks
Author:  Beachbob [ Mon Nov 16, 2009 6:37 pm ]
Post subject:  Re: Maxwell Windlass Pics?
This is the only photo that I can find that shows the windless at all. Ours is shrink wrapped and ready for a long winter's nap so I hope this is of some help.

Image
Author:  Cattailspa [ Mon Nov 16, 2009 7:38 pm ]
Post subject:  Re: Maxwell Windlass Pics?
I have one from our old 268.

Image
Author:  firecadet613 [ Mon Nov 16, 2009 10:59 pm ]
Post subject:  Re: Maxwell Windlass Pics?
Sure looks different without a rode or chain in there Larry!

Here's what I could dig up, on my '04 268.

Image

Image

I can't get any more until April, so I hope this helps.
Author:  acguy [ Tue Nov 17, 2009 6:56 am ]
Post subject:  Re: Maxwell Windlass Pics?
That's a good start for me. I am just looking to see if I'm going to have to fill in the haus pipe when I install mine. Looks like I might.
Author:  Barry [ Wed Nov 25, 2009 10:07 am ]
Post subject:  Re: Maxwell Windlass Pics?
Hi Mike,

Sorry that I cannot send any pics but I am in Germany and my boat is in Spain.

You will have to close up the fall hole as it would be open and one bolt would not have any hold. I made a wedge to give mine perfect alignment and it works with such speed now it is amazing.

Wow, what a diference.

Good luck.

Barry Tennant
Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/