www.iFourWinns.com • View topic

View unanswered posts | View active topics

Board index » Four Winns Models » Cruiser - Vista

All times are UTC - 6 hours [ DST ]

out drive question

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

bndfishing

Post subject: out drive question

Posted: Mon May 31, 2010 9:55 pm

email admin your custom rank

Joined: Sat Sep 06, 2008 10:15 pm
Posts: 239
Location: St. Helens Oregon

I have a 5.7 GI-I with a DP-SM outdrive. I am trying to find anodes and exhaust bellows for the outdrive and am having a hell of a time. Is the DP-S the same as the SM or anything else, and is the DP-SM a uncommon drive, it's not listed very often in the parts descriptions.

_________________
2000 268 Vista "Reely Nauti"
http://www.facebook.com/#!/rivercruiser

Top

Graham R

Post subject: Re: out drive question

Posted: Tue Jun 01, 2010 7:41 am

email admin your custom rank

Joined: Thu May 18, 2006 12:31 pm
Posts: 2108
Location: Chester, UK

Apart from the lower unit, the SX and DP-SM are identical (apart from the badge on the cover!); the only "odd" thing you may come across is a DP-SM MHP. For that one, the only difference is the transom shield. This shield has 2 anodes, compared to the 1 and uses a stub type exhaust hose attached to the transom shield only. The other type of exhaust hose, attached to both the transom and tilt assembly is much quieter. If you're converting from the stub type, you'd need the large internal circlip as well as the hose itself ( that clip fixes it to the tilt assembly).

Graham

Top

Page 1 of 1

[ 2 posts ]

Board index » Four Winns Models » Cruiser - Vista

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 13 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum