www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Sun May 11, 2025 9:43 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Wed Jul 07, 2010 7:41 am 
Offline
Guppy

Joined: Sat May 29, 2010 8:43 am
Posts: 8
Location: Navarre, Florida
Years ago I remember seeing a little suction bubble device that attaches to the AC inlet to allow running the AC when out of the water with a garden hose attached. But I am unable to find this device. Thought it would be great to flush the AC after use in saltwater.

_________________
Seajay-v248


Top
 Profile  
 
PostPosted: Wed Jul 07, 2010 12:06 pm 
Offline
email admin your custom rank

Joined: Wed Nov 19, 2008 12:52 pm
Posts: 227
Location: Ft Myers, Florida
No you do not need to flush the A/C. The condenser coils on most marine A/C units use titaniuim tubes which is not effected by the salt water. Just keep the sea strainer clean and you should be Ok.

_________________
Image
2008 318 Vista "Ka-wai-ola"
350 MPI/BravoIII DTS Seacore
2006 1500 Key West -70 Yamaha
Previous Boats
Key West 2300CC
Pacemaker 270 Sport Fish
290 Sea Ray


Top
 Profile  
 
PostPosted: Wed Jul 07, 2010 12:17 pm 
Offline
Guppy

Joined: Sat May 29, 2010 8:43 am
Posts: 8
Location: Navarre, Florida
Great! And thanks, at least one item that I won't have to worry about in salt water!!

_________________
Seajay-v248


Top
 Profile  
 
PostPosted: Wed Jul 07, 2010 12:26 pm 
Offline
268 Vista

Joined: Tue May 16, 2006 9:49 am
Posts: 4989
Location: West Michigan
Very few marine condensers are made from titanium. Indeed some are, but most are made from Cupronickel for the following reasons:
1.) Up to 350% enhancement in BTU/hr transfer
2.) Increased internal burst pressure and compression strength
3.) Lower cost compared to other specialized tubing (ie. titanium)

Regardless, there is no need to flush your system, it will handle the salt water.

_________________
One of 4 Previous (Sold) Boats:
2000 Four Winns 268 Vista
Image
Current Boat: 2004 Chaparral 235 ssi cuddy
Image


Top
 Profile  
 
PostPosted: Sun Jul 11, 2010 12:06 pm 
Offline
The Real Dr.Evil
User avatar

Joined: Sun Apr 22, 2007 9:35 am
Posts: 1004
Location: Greensburg PA
From Wikipedia:

Cupronickel or copper-nickel (sometimes incorrectly referred to as "cupernickel") is an alloy of copper that contains nickel and strengthening elements, such as iron and manganese. Cupronickel is highly resistant to corrosion in seawater, because its electrode potential is adjusted to be neutral with regard to seawater. Because of this, it is used for piping, heat exchangers and condensers in seawater systems as well as marine hardware, and sometimes for the propellers, crankshafts and hulls of premium tugboats, fishing boats and other working boats.


I wonder, does it still retain the natural biocide properties of copper? If so that would mean marine growth would not be an issue. Just keep the strainer clean.

_________________
Brett DiMichele


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 29 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group