| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| 2000 248 vista screen door https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=6424 |
Page 1 of 1 |
| Author: | sachem29 [ Fri Aug 20, 2010 11:01 am ] |
| Post subject: | 2000 248 vista screen door |
Does anyone know where I can get a new/used screen door for my 2000 248 Vista? Went on vacation to Alaska, had left the boat at my neighbors dock, he accidentally broke the screen part of the door. Too many pieces to epoxy together. Thanks |
|
| Author: | powellcrazy [ Fri Aug 20, 2010 9:02 pm ] |
| Post subject: | Re: 2000 248 vista screen door |
I had some parts to the cabin door fail and need to replace, went to dealer and they tell me to goto home depot and search there screen door section...... Guess our boats are too old.... |
|
| Author: | acguy [ Fri Aug 20, 2010 9:09 pm ] |
| Post subject: | Re: 2000 248 vista screen door |
Glass shops usually repair screens. |
|
| Author: | sachem29 [ Sat Aug 21, 2010 10:32 am ] |
| Post subject: | Re: 2000 248 vista screen door |
Thanks for the replies. I'm going to try to epoxy the door frame back together. I guess that FW no longer has these "old' doors in stock. |
|
| Author: | powellcrazy [ Sat Aug 21, 2010 3:57 pm ] |
| Post subject: | Re: 2000 248 vista screen door |
acguy wrote: Glass shops usually repair screens. You can buy all the needed screen matl at lowes or home depot to fix rotted screen, but hardware to match what we already have is my issue. Guess its time to think about putting her up for sale and thinking about a newer and bigger vista!!!!  (wishful thinking, can not think about that 318 just yet)
|
|
| Author: | sb55 [ Sun Aug 22, 2010 6:01 am ] |
| Post subject: | Re: 2000 248 vista screen door |
Did the whole door break? Someone fabricated that door out of white plexi. Should be able to be re-made at a shop. |
|
| Author: | sachem29 [ Sun Aug 22, 2010 6:55 am ] |
| Post subject: | Re: 2000 248 vista screen door |
Quote: Did the whole door break? Someone fabricated that door out of white plexi. Should be able to be re-made at a shop. Did the whole door break? Someone fabricated that door out of white plexi. Should be able to be re-made at a shop. Only a small piece of the door broke by where the little door allows you access to the lock on the outer door when your inside and the doors are shut. I epoxied it back together after finding all the pieces. I guess the 288 or 318 will have to wait
|
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|