www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
re powering my 23.5 vista https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=6835 |
Page 1 of 1 |
Author: | Scott T [ Tue Nov 02, 2010 7:48 pm ] |
Post subject: | re powering my 23.5 vista |
Are there any thoughts on re-powering my '89' 23.5 Vista, my engine is shot so will probably put a 300 hp 5.7 from US Engine who is down the road in Kirkland WA. The torque will destroy the old cobra outdrive so what is my best option for a 4000 lb boat, there are so many gear ratios to choose from etc. I will also add a three inch riser on the exhaust and a hold baffle between the horn and the elbow to keep any waves from pushing water into the engine while pulling crab pots with the engine off. Scott |
Author: | boatingboy [ Sat Dec 29, 2012 10:26 am ] |
Post subject: | Re: re powering my 23.5 vista |
I have a 5.7 Volvo on my Four Winns 225 Sundacer! 280 HP! WOT will hit 51 MPH! |
Author: | Winter Sux [ Sat Dec 29, 2012 4:32 pm ] |
Post subject: | Re: re powering my 23.5 vista |
boatingboy wrote: I have a 5.7 Volvo on my Four Winns 225 Sundacer! 280 HP! WOT will hit 51 MPH! So you have the above mentioned boat; a Four Winns 225 Sundancer,,,,um OK! And a 1999 Four Winns 298 Vista capable of 44 mph. Nice fleet so far. What else do you have? John ![]() |
Author: | boatingboy [ Sat Dec 29, 2012 5:31 pm ] |
Post subject: | Re: re powering my 23.5 vista |
That is it right now. What do you have? |
Author: | LouC [ Sun Dec 30, 2012 12:52 pm ] |
Post subject: | Re: re powering my 23.5 vista |
What engine and drive ratio did it have originally? If the Cobra is in good shape a 5.7 should not tear it up, you can convert it to a VolvoSX by changing the pivot housing but it's expensive. |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |