www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

seat height on a 1996 four winns vista 23'8
https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=6949		 Page 1 of 1
Author:  Don21 [ Mon Jan 03, 2011 8:57 pm ]
Post subject:  seat height on a 1996 four winns vista 23'8
I have a 1996 four winns vista 23'8 with a fold down seat its in storage where i cant get to it does anyone know the height of the rear seat i need to make new legs thanks
Author:  beyond the blue [ Tue Jan 04, 2011 1:11 pm ]
Post subject:  Re: seat height on a 1996 four winns vista 23'8
Don21 wrote:
I have a 1996 four winns vista 23'8 with a fold down seat its in storage where i cant get to it does anyone know the height of the rear seat i need to make new legs thanks


I assume your referring to the rear wrap-around seat, if you are, and its the same as mine it only has one steel leg that fits with a toggle into a receiver on the floor but its not perpendicular, its more like a stay to stop the seat from tipping up. If this is what you need measuring I am going to the boat this weekend and will gladly measure it for you.
Author:  Don21 [ Tue Jan 04, 2011 3:30 pm ]
Post subject:  Re: seat height on a 1996 four winns vista 23'8
its probly the same height but my boat doent have the wrap around its just a bench seat mine has 2 legs that i can flip up and the bottum of the seat will fold down so the boat is more open when your parked or fishing. if you get a chance that would be great thank you
Author:  beyond the blue [ Sat Jan 08, 2011 12:56 pm ]
Post subject:  Re: seat height on a 1996 four winns vista 23'8
Don21 wrote:
its probly the same height but my boat doent have the wrap around its just a bench seat mine has 2 legs that i can flip up and the bottum of the seat will fold down so the boat is more open when your parked or fishing. if you get a chance that would be great thank you


My seat measured 9 1/4 inches from the underside to the floor. Unless you are planning on making adjustable height legs and using 9 1/4 inches as a datum, I would suggest you measure your boat as it could be considerably different to mine.
Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/