Here's the side discharge thru hull FW lists for my boat....
http://www.fourwinns.net/partbook/showp ... 03&stop=NA &mx=1
The bottom intake thru hull
http://www.fourwinns.net/partbook/showp ... 03&stop=NA &mx=1
| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Thru Hull Fittings https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=7027 |
Page 1 of 1 |
| Author: | acguy [ Sun Jan 30, 2011 3:53 pm ] |
| Post subject: | Thru Hull Fittings |
Just gathering up some parts in the off season and am wondering if any one can tell me how long the thru hull fittings are. I need to put one in the bottom of the hull in the bilge are and one out the side of the hull in the aft cabin. This is for a 2000 248 Thanks in Advance |
|
| Author: | Borchik [ Wed Feb 02, 2011 9:29 am ] |
| Post subject: | Re: Thru Hull Fittings |
its hard to say unless someone has done it on that boat. however pretty much any marina or boating store will have lots in stock in both plastic and the different metals for whatever you need. |
|
| Author: | firecadet613 [ Wed Feb 02, 2011 9:48 am ] |
| Post subject: | Re: Thru Hull Fittings |
I should have pics at home of both the bilge thru hull and the side one as well. I would definately go with stainless steel and not plastic. What sizes are they offered in? |
|
| Author: | Cap'n Morgan [ Wed Feb 02, 2011 12:33 pm ] |
| Post subject: | Re: Thru Hull Fittings |
All lengths are 2-3/4" thru 3-1/2" |
|
| Author: | firecadet613 [ Wed Feb 02, 2011 6:03 pm ] |
| Post subject: | Re: Thru Hull Fittings |
Here's the side discharge thru hull FW lists for my boat.... http://www.fourwinns.net/partbook/showp ... 03&stop=NA &mx=1 The bottom intake thru hull http://www.fourwinns.net/partbook/showp ... 03&stop=NA &mx=1
|
|
| Author: | acguy [ Wed Feb 02, 2011 7:48 pm ] |
| Post subject: | Re: Thru Hull Fittings |
Thanks Joe. Any idea on the length. My FW dealer just sticks it to you when you order parts from them!!! |
|
| Author: | firecadet613 [ Wed Feb 02, 2011 8:44 pm ] |
| Post subject: | Re: Thru Hull Fittings |
The first one is an Attwood part....66546-1 http://www.amazon.com/dp/B001HC4VJ6/ref ... B001HC4VJ6 http://www.attwoodmarine.com/userfiles/ ... llscup.pdf The second is a Perko 322 005 http://www.boatersworld.com/product/MP80820614.htm Second down on this page, http://www.boatfix.com/bypartnokey.ASP? ... tem=&make= Although this looks like the same part.. http://www.defender.com/product.jsp?pat ... &id=142432 The valve appears to be a 4726K12 from McMaster-Carr which they say was replaced by a 4726K24. http://www.fourwinns.net/partbook/showp ... 03&stop=NA &mx=1  Looks like a plain 3/4" bronze ball shut off valve to me. Sorry to hear about your dealer. I have a great dealer...sure they can help once they get back from winter break. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|