www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Sat May 10, 2025 5:00 am

View unanswered posts | View active topics


Board index » Four Winns Models » Cruiser - Vista

All times are UTC - 6 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
  Print view Previous topic | Next topic 
Author Message
teker
 Post subject: Vista hatch size
PostPosted: Tue Mar 01, 2011 11:29 pm 
Offline
email admin your custom rank

Joined: Fri May 26, 2006 8:06 pm
Posts: 225
Location: N.E. OHIO
Can someone tell me the exact size of the Lewmar hatch on a 1999 Vista 258? I found a deal on a Bomar hatch here in Fl. and wonder if I can use it as a replacement.

_________________
Inboard, outboard, onboard never bored
Image KUT 'N LOOSE
'99 258 VISTA
Top
 Profile  
 
acguy
 Post subject: Re: Vista hatch size
PostPosted: Wed Mar 02, 2011 7:36 am 
Offline
email admin your custom rank

Joined: Sun Jul 05, 2009 5:56 am
Posts: 931
Location: Georgian Bay, Ontario
Looks like the standard 22" round
http://www.fourwinns.net/partbook/basemodel.php?model=258V-D99
http://www.fourwinns.net/partbook/basemodel.php?model=258V-D99

_________________
2001 328 Vista "Nauta Dream 2"
AB Inflatable 10AL "Little Dreamer"
2000 248 Vista
1997 225 Sundowner


Mike
Top
 Profile  
 
GTBecker
 Post subject: Re: Vista hatch size
PostPosted: Sun Mar 13, 2011 1:34 pm 
Offline
email admin your custom rank

Joined: Mon Nov 17, 2008 3:55 pm
Posts: 164
Location: Cape Coral
teker wrote:
... hatch on a 1999 Vista 258...

What broke on yours?

_________________
Tom
Cape Coral

'99 Four Winns 258 Vista
http://www.ustream.tv/channel/bowcam
http://www.ustream.tv/channel/cape-coral-marine-radio VHF
http://67.207.143.181/vlf9.m3u VLF: Lightning, spherics
Top
 Profile  
 
teker
 Post subject: Re: Vista hatch size
PostPosted: Sun Mar 13, 2011 2:12 pm 
Offline
email admin your custom rank

Joined: Fri May 26, 2006 8:06 pm
Posts: 225
Location: N.E. OHIO
The hinge.

_________________
Inboard, outboard, onboard never bored
Image KUT 'N LOOSE
'99 258 VISTA
Top
 Profile  
 
GTBecker
 Post subject: Re: Vista hatch size
PostPosted: Sun Mar 13, 2011 7:06 pm 
Offline
email admin your custom rank

Joined: Mon Nov 17, 2008 3:55 pm
Posts: 164
Location: Cape Coral
Did it separate from the disk, or did it break the molded hinge pin or its socket? If the former, I found it was repairable by disassembling, roughing, cleaning and re-adhering it to the disk with a slow epoxy and clamps. Mine failed because I ignored the binding friction lever, the device that holds the disk open. It became more and more difficult to open, and forcing it eventually separated the disk from the deck hinge.

If a hinge pin broke, you might consider cutting the remnant off cleanly and replacing it with a stainless stud, drilled into the hinge where the pin was.

The exact outer diameter of the Lewmar Concept 22 is 577mm, ~22.75", but the hole in the deck, of course, is less.

_________________
Tom
Cape Coral

'99 Four Winns 258 Vista
http://www.ustream.tv/channel/bowcam
http://www.ustream.tv/channel/cape-coral-marine-radio VHF
http://67.207.143.181/vlf9.m3u VLF: Lightning, spherics
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 

Board index » Four Winns Models » Cruiser - Vista

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 15 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group