First_Mate,
Thanks for the info. I have a couple more questions. Here is what I plan to do. I currently have 3 open slots in my dc panel. One slot for radar, one for chartplotter,and one for a electronics accessory. I plan on running the radar to one, chartplotter to the other and put the xm,transducer and another chartplotter on the accy. With the accy I plan on putting a fuse block and running all three to it. Does this sound right and what gauge of wire do I need? Also, Do I need to keep the inline fuses if I have a fuse block installed? In regards to the chartplotter garmin only gives you 6ft of power cable. Can I add length with 14 ga wire to the dc panel or should I go with 10ga. The length I need is about 18ft. One more questions is if you have the radar on a seperate fuse do you still need an inline fuse? same goes with the chartplotter. I don't know if your panel is the same but probably close to what I have. Thanks and sorry for all the questions
Perfect Timing
298 Vista
|