| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Do you think FW would sell the cherry laminate they use? https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=849 |
Page 1 of 1 |
| Author: | Brett248Vista [ Wed May 09, 2007 8:50 pm ] |
| Post subject: | Do you think FW would sell the cherry laminate they use? |
I had a brain storm idea... The Norcold fridges used in FW Boats do not come with the decorative front pannel, FW has to buy that seperately. Well anyway I was thinking my boat has the black front pannel, why not get a piece of the Cherry Laminate to put in there instead! I think that would look fantastic and would break up all the black down there. Do you think FW would sell a piece or point me to the manufacturer of the laminate? |
|
| Author: | ShanMan14 [ Thu May 10, 2007 5:26 am ] |
| Post subject: | |
That's a great idea. They probably won't sell to you directly, but may tell you their supplier. It's worth a phone call. |
|
| Author: | mkivbren [ Thu May 10, 2007 4:01 pm ] |
| Post subject: | |
Brett, let us know man. I got stuck with white laminate and it looks cheap next to the cherry laminate for the cabinetry. I was thinking of doing this as a winter project. |
|
| Author: | Brett248Vista [ Thu May 10, 2007 6:04 pm ] |
| Post subject: | |
I will have to give FW a ring and see if they can either hook me up, or hook me up with the supplier. It should be easy to work with and the result I think would look classy. |
|
| Author: | wkearney99 [ Sat May 12, 2007 9:35 am ] |
| Post subject: | |
Heh, I saw the name of the cabinet makers when I was installing some audio and network gear last summer. There was a sticker with their name up inside the rear of the cabinetry just next to the cabin steps. I'm hoping not to twist myself into a pretzel again going back in there. You might also consider taking a door off and going to a local cabinetry or woodworking supply place. It'd no doubt be less expensive than getting it from a marine supplier. Or ask the fridge maker if they have one that's 'close enough'. |
|
| Author: | ShanMan14 [ Sun May 13, 2007 12:36 pm ] |
| Post subject: | |
On the bottom of my V-Berth table is the wood maker's name burned in. I can't remember the name of it now, but they're in Cadillac as well. I'll write it down next time I'm at the boat. |
|
| Author: | Brett248Vista [ Sun May 13, 2007 3:36 pm ] |
| Post subject: | |
ShanMan14 wrote: On the bottom of my V-Berth table is the wood maker's name burned in. I can't remember the name of it now, but they're in Cadillac as well. I'll write it down next time I'm at the boat.
Shan, I have it on the underside of my table as well. But I don't beleive the people who made the table are the same who made the cabinetry. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|