www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
Anchor roller 238 vista suggestions please https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=8770 |
Page 1 of 1 |
Author: | shipfaced [ Tue Jan 31, 2012 2:52 am ] |
Post subject: | Anchor roller 238 vista suggestions please |
Im thinking about installing an anchor roller or windlass on my 1997 238 vista any suggestions? Thanks ShipfacedMscottcook |
Author: | Cap'n Morgan [ Tue Jan 31, 2012 10:22 am ] |
Post subject: | Re: Anchor roller 238 vista suggestions please |
I would check this link. If you do a search, often you can answer your own questions. viewtopic.php?f=6&t=8395 The boatless one (Beyond the Blue) can probably give you some specifics since he had a 238V. |
Author: | Paul I. [ Tue Jan 31, 2012 10:26 am ] |
Post subject: | Re: Anchor roller 238 vista suggestions please |
Forgive me, but you must install the roller before you can install the windlass. On the roller, dry fit it first. If the roller is not mounted far enough out, the anchor will be hitting the boat. Use a backing plate, or large thick fender washers. This will spread out the load. In my case I had to move the running lights. Download the specs on the windlass you want. Make sure you have the space above and below the deck. Also, check for wires that might be in the way. On a boat like yours, you will need to use 6awg to 8 size wire depending on how much wire is needed & windlass. |
Author: | shipfaced [ Tue Jan 31, 2012 11:29 am ] |
Post subject: | Re: Anchor roller 238 vista suggestions please |
Thanks for the replies. My 238 isn't going to be easy to install windlass because of the bow light and remote spotlight being installed on anchor locker lid. I've decided to install anchor roller at the very front of my bow. This past year I seen a a similar vista 238 with an anchor roller and and the anchor rope was directed to the starboard dock line cleat and then the dock line went into the locker. It's just awkard to drop anchor with the shape of rub rail. I'll spend the money on a swim platform instead or A nautical napper(h2omarinesupplies.com). Which one do you guys think?. ShipfacedMscottcook |
Author: | beyond the blue [ Tue Jan 31, 2012 6:56 pm ] |
Post subject: | Re: Anchor roller 238 vista suggestions please |
Cap'n Morgan wrote: I would check this link. If you do a search, often you can answer your own questions. viewtopic.php?f=6&t=8395 The boatless one (Beyond the Blue) can probably give you some specifics since he had a 238V. All I can offer is photo's I'm afraid. ![]() ![]() |
Author: | shipfaced [ Tue Jan 31, 2012 9:59 pm ] |
Post subject: | Re: Anchor roller 238 vista suggestions please |
Thanks for the pic of anchor roller.Im definitely going to modify my bow a bit. Shipfaced |
Author: | Paul I. [ Tue Jan 31, 2012 10:41 pm ] |
Post subject: | Re: Anchor roller 238 vista suggestions please |
beyond the blue wrote: Cap'n Morgan wrote: I would check this link. If you do a search, often you can answer your own questions. viewtopic.php?f=6&t=8395 The boatless one (Beyond the Blue) can probably give you some specifics since he had a 238V. All I can offer is photo's I'm afraid. ![]() ![]() They don't leave you much room for ether the windlass or the roller!! |
Author: | beyond the blue [ Wed Feb 01, 2012 3:29 am ] |
Post subject: | Re: Anchor roller 238 vista suggestions please |
Quite right. There's not much room for anything on a 238. |
Author: | shipfaced [ Wed Feb 08, 2012 4:11 pm ] |
Post subject: | Re: Anchor roller 238 vista suggestions please |
I do like my 238 especially for first boat. I will be upgrading to a 30 footer this year or next at the latest.my 238 is a great learning curve for sure. Shipfaced |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |