| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Walk Through Windshield https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=8865 |
Page 1 of 1 |
| Author: | weather [ Fri Mar 02, 2012 10:07 am ] |
| Post subject: | Walk Through Windshield |
Hi All, my walk through windshield leaks like crazy and I'd like to stop putting bowls under it. I know I need to replace the rubber that holds the glass in the frame as it's all dried up and shrunken. My questions are: 1. How do you remove the walk through section of the windshield? I see a small plastic clip in the middle of the 'hinge' but don't know how to get it out. 2. Anyone done this and what rubber did you use? I tried to go directly to Taylor, but their explaination of the options was horrible. Thanks, Steve. |
|
| Author: | Cap'n Morgan [ Fri Mar 02, 2012 10:35 am ] |
| Post subject: | Re: Walk Through Windshield |
http://greatlakesskipper.com/category-1 ... ories.html |
|
| Author: | weather [ Fri Mar 02, 2012 11:08 am ] |
| Post subject: | Re: Walk Through Windshield |
Cap'n Morgan wrote: http://greatlakesskipper.com/category-1/9_363-boat-windshields-and-parts-accessories.html Excellent - thank you. Any idea how to remove the center part of the windshield? |
|
| Author: | weather [ Wed Mar 07, 2012 4:42 pm ] |
| Post subject: | Re: Walk Through Windshield |
bump |
|
| Author: | weather [ Sat Mar 10, 2012 3:13 pm ] |
| Post subject: | Re: Walk Through Windshield |
No one? I just want to remove the center part of the walk through - the part that swings. |
|
| Author: | weather [ Sat Mar 24, 2012 4:22 pm ] |
| Post subject: | Re: Walk Through Windshield |
I have more pictures, hopefully this will jog someones memory. I want to separate the hinge if I can, sort of like pulling the pin on a door hinge, except this has no pin. A look at the end of the hinge:  The small plastic piece in the middle of the hinge that I think is holding it from lifting apart.  Another angle:  Overall image of the window I want to remove:  Any idea's? |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|