| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Removing Pad on bulkhead 268 Vista https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=9104 |
Page 1 of 1 |
| Author: | rmorrison9773 [ Wed Apr 18, 2012 6:25 am ] |
| Post subject: | Removing Pad on bulkhead 268 Vista |
How do you remove the vinyl pad that covers the exterior wall of the head? This would be the pad between the head door and the V-bunk. The vinyl has become u-tucked at the bottom and I would like to remove the pad and re-glue the vinyl. |
|
| Author: | elmwood [ Mon Apr 23, 2012 12:40 am ] |
| Post subject: | Re: Removing Pad on bulkhead 268 Vista |
I really don't know what pad you are talking about since I don't know that boat but if it is mounted vertically and had some sort of a seam in the design look for a hole. I might give the apperance of a small tear. What they do is leave a hole while sewing it and that is where you will find a screw. Hope this helps, Eric |
|
| Author: | acguy [ Mon Apr 23, 2012 6:07 am ] |
| Post subject: | Re: Removing Pad on bulkhead 268 Vista |
I had mine off this weekend. Remove the medicine cabnet in the head and the mirror on the wall. that will give you a look at all the screws holding it on. You will have to undo the screws to the starboard side shelf also. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|