www.iFourWinns.com

How do you remove the vinyl pad that covers the exterior wall of the head? This would be the pad between the head door and the V-bunk. The vinyl has become u-tucked at the bottom and I would like to remove the pad and re-glue the vinyl.

I really don't know what pad you are talking about since I don't know that boat but if it is mounted vertically and had some sort of a seam in the design look for a hole. I might give the apperance of a small tear. What they do is leave a hole while sewing it and that is where you will find a screw.

Hope this helps,
Eric

_________________
1996 258 Vista 5.8L Fi Cobra SX
2007 (NBS) 2500HD Ext Cab, Long Bed

I had mine off this weekend. Remove the medicine cabnet in the head and the mirror on the wall. that will give you a look at all the screws holding it on. You will have to undo the screws to the starboard side shelf also.

_________________
2001 328 Vista "Nauta Dream 2"
AB Inflatable 10AL "Little Dreamer"
2000 248 Vista
1997 225 Sundowner


Mike