www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Mon May 12, 2025 12:09 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: make/model of portholes?
PostPosted: Thu May 31, 2012 10:02 am 
Offline
wkearney99

Joined: Fri May 19, 2006 3:50 pm
Posts: 2444
Location: Boat in Annapolis, live in Bethesda, MD
Anyone know the make/model of the portholes used on the 2006+ Vista models? I've got one in the galley on our 348 and the bottom center screw post for the clamp has broken off (due to corrosion it would seem). It does not appear that this can be easily replaced. But then I can't be entirely sure as the porthole is tucked way back inside the galley cabinet and is a hassle to access.

I only noticed it by chance when trying to determine why I have some water on the galley floor now and then. I have yet to find out the source for this. It does not appear to be the water system near the pump (under the forward berth). I've placed some strategic pieces of paper towel around and they're not getting wet between the pump and the damp spots. So it's got to be coming from somewhere else. It does not appear to have a salty taste so I don't think it's seawater. I have not gotten into the galley cabinet to see if it's the galley sink, faucet or lines behind it. But that port hole might be a source, if not 'the' source.

Meanwhile I might as well figure on replacing the porthole. Thus my question, anyone know the vendor and model being used?

_________________
-Bill Kearney, 2005 348 Vista


Top
 Profile  
 
PostPosted: Thu May 31, 2012 10:17 am 
Offline
email admin your custom rank

Joined: Sun Dec 07, 2008 11:07 am
Posts: 815
Location: Freeland, MI
Bill,

I believe these are what your looking for. there is a drawing you could verify it with.

http://www.lewmar.com/product-listing.asp?action=search&type=59

_________________
Jeff

'14 Cruisers 380 Express "Simon Sez"
Merc 8.2 Mag MPI 380
DTS B3X, (x2) Axius Premier


(SOLD)
'08 V318
Merc 350 Mag MPI 300
DTS Seacore, B3 (x2)

Image


Top
 Profile  
 
PostPosted: Thu May 31, 2012 10:45 am 
Offline
wkearney99

Joined: Fri May 19, 2006 3:50 pm
Posts: 2444
Location: Boat in Annapolis, live in Bethesda, MD
The new models appear to use a different clamp style. One that clamps instead of turning. I'd prefer to avoid an assortment of different hatches, if possible. Although the one behind the galley is far enough away from the others as to not look odd if it were different.

That and I'm not sure they're lewmar. Their website doesn't appear to show ones that look like what I've got installed. I think they're by Bomar-Pompanette:

Sort of like these:
http://www.pompanette.com/pompweb.nsf/7 ... enDocument

_________________
-Bill Kearney, 2005 348 Vista


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group