| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| 358 water in hull from swimplatform cases https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=9865 |
Page 1 of 1 |
| Author: | yannick358 [ Wed Jul 18, 2012 2:05 pm ] |
| Post subject: | 358 water in hull from swimplatform cases |
Hi ! I have a 358 2008 I always have water in my hull. One week end I clean it perfectly. then after a ride I saw again water in my hull ! humm. After investigation I saw that both cases on the swimplatform have a hole and redirect the water in the hull. So I put a plug in both cases. Clean up the hull again ,an other ride after, Still water in my hull ! grrr In the engine room there are fiberglass beam and the water come from the hose that is on the external beam , starboard and port side. This hose im pretty sure is "connected" to the swimplatforms cases. Why even I block the hole in the case I still get water from this hoses ? any ideas or experience ? thanks |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|