| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Head shower leaking 348 Vista https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=9958 |
Page 1 of 1 |
| Author: | Kashmir [ Mon Jul 30, 2012 3:34 pm ] |
| Post subject: | Head shower leaking 348 Vista |
My Head shower is leaking at the single lever shower mixer handle. I removed the handle to see if there was a washer or something else that needed to be replaced. However, the internals for the shower mixer seem to be self-contained and not sure how to dis-assemble to stop leakage. Has anyone had to replace the shower handle mixer from ShurFlo? It looks like part #134-0602-CP from ShurFlo. I would think its just a simple washer or valve that has gotten old and needs to be replaced. Thanks, Joe |
|
| Author: | jnizi [ Mon Jul 30, 2012 3:45 pm ] |
| Post subject: | Re: Head shower leaking 348 Vista |
I had the same type of leak. ShurFlo sent me a replacement assembly free of charge. Mine was only 2 years old at the time. I was able to figure out what I needed based on the website drawings. Otherwise, call Shurflo, they were very helpful. I tried to find a piece at the local hardware store but no luck. Good luck. |
|
| Author: | Kashmir [ Fri Aug 03, 2012 8:46 am ] |
| Post subject: | Re: Head shower leaking 348 Vista |
Thanks for the advice. I called ShurFlo and while they no longer distribute these products they pointed me to the correct distributor. Ambassador Marine has taken over the distribution. So, I called them and they were very helpful. I was able to order the specific part which was E-507109 (Ceramic Disk Cartridge) for $14.99 versus the entire shower mixer handle which listed for $166. I have not received or installed yet but keeping fingers crossed that this will be an easy installation and it resolves the leakage. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|