www.iFourWinns.com

Time to sell what was one of my favorite mods on my 2008 V358.
This is the custom swim platform carpet I had made at the beginning of last season. It is in excellent condition, free of stains and wear and was always stored inside when not being used. It has been stored in my home since decommissioning the boat last fall.

This is the Ultra Teak AquaMat from Corinthian Carpet with a vinyl backing they call 'AquaLoc' which I found to be very durable and clearly a better alternative to the backing of Four Winns' factory carpet. The construction is excellent (the carpet material is BCF Omega Polypropylene so it can withstand harsh environments) and the fit is perfect based on the custom template I provided after several hours of painstaking work. It is also presumably a perfect fit for the older 348 Vista and newer V375. There is a small (approximately 1” x 2 1/2”) cutout on the starboard transom side that accommodated an eye for my davit system. While I did not install snaps as it was only used at the dock or at anchor, they can certainly be easily added.

There is a discussion about it here.
I am happy to send fresh pictures on request.

I paid $432. I am selling it for $300 or best offer and will include shipping.

Please PM me with any inquiries.

_________________
Previously:
2008 V358/Volvo 5.7 GXi Inboards

Well, I had a buyer who bailed a couple of weeks ago when they ended up trading in their boat. So the carpet is available again. I've dropped the price to $300 or best offer and will include shipping.

Happy boating season one and all

_________________
Previously:
2008 V358/Volvo 5.7 GXi Inboards

I I could just afford the boat to go with the carpet, I'd be all over this. Someone is going to get a great deal on a nice accessory. Good luck!

_________________
Norris Lake, Stardust Marina, Andersonville, TN
2005 Four Winns 230 Horizon 5.7L Volvo Gi/DP
2001 Maxum 1900SR 5.0L V8 (Sold)
2011 Nissan Armada Platnum

Sierra,

I know we talked last year on this, if it is not to much trouble, I wonder if you could take a few measurements for me to see if I can re cut and bind it Your 358 had a 12 beam, I'm only 10' 9"

point to point on the gunwale tails

center to center on the hatch hinges

Max depth (or and aft) in the center

and depth from the hatch hinge bump outs to the rear edge

I think i should be able to see if it would work with that.

_________________
Jeff

'14 Cruisers 380 Express "Simon Sez"
Merc 8.2 Mag MPI 380
DTS B3X, (x2) Axius Premier


(SOLD)
'08 V318
Merc 350 Mag MPI 300
DTS Seacore, B3 (x2)

Hey Jeff - it would be my pleasure and I can't imagine why it wouldn't work. I'll be at the location of the carpet on Saturday and will PM you the measurements.

_________________
Previously:
2008 V358/Volvo 5.7 GXi Inboards

Hi,

Is this still available?

It is indeed. Please feel free to contact me by PM for more information.

_________________
Previously:
2008 V358/Volvo 5.7 GXi Inboards

Sierra I sent you a PM asking if it is still available

_________________

Terry
2005 Vista 348
5.7 Volvo I/O

Sold??

Sold

_________________
Previously:
2008 V358/Volvo 5.7 GXi Inboards