www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

Cabin Table for Vista 268
https://www.smwebhead.com/phpBB3/viewtopic.php?f=8&t=12307		 Page 1 of 1
Author:  pmcdaniel [ Mon Sep 09, 2013 6:13 pm ]
Post subject:  Cabin Table for Vista 268
Hello everyone, I am new to this forum. Just bought a Vista 268 and realized that the table was missing after we closed on the deal. Is there anywhere to find one that will match at a reasonable price?
Thanks,
Paula
Author:  Bliss36 [ Mon Sep 09, 2013 7:38 pm ]
Post subject:  Re: Cabin Table for Vista 268
Hello Paula and welcome to the forum! Are you looking for the white fiberglass cockpit table or the glossy wood one for the cabin? If you are looking for a wood table it might be worth calling the company that originally made them herehttp://wexfordwoodworkings.com/

If it doesn't have to be a perfect match with the original than maybe here would be a good place to start http://greatlakesskipper.com/cabin-and-galley/tables-accessories/tables-and-tables-with-pedestals

Also this dealership's parts department has lots of leftover parts directly from the factory...might be worth giving them a call http://www.hallssportcenter.com/custompage.asp?pg=partsGood luck with your search and congrats on your new boat :D
Author:  NiagaraChillin [ Mon Sep 09, 2013 8:01 pm ]
Post subject:  Re: Cabin Table for Vista 268
You might actually have better luck and def cheaper results if you go to a local cabinet shop and see if they will make one for ya. You can buy the stainless hardware at any marine website (Overtons, Westmarine, etc). Plus you can get it custom made to YOUR specs.

I had to replace the cockpit table in my Sundowner and made it myself. I made it slightly larger so people could actually use it (factory was too small). Total cost was about $35.00.
Author:  jayjay4735 [ Tue Sep 10, 2013 1:07 am ]
Post subject:  Re: Cabin Table for Vista 268
I had no cockpit table for my 258 and I ordered one of these.

http://www.searay-parts.com/Paragon-Pla ... ounted.htm

They list them as flawed, but I couldn't notice anything wrong on them. I got the mounting pole and hardware from a four winns dealer, and it works really well.
Author:  pmcdaniel [ Wed Sep 11, 2013 10:38 am ]
Post subject:  Re: Cabin Table for Vista 268
Thank you all for the replies! It is the wood looking one, I will check out a few of these links and if not maybe I will try to make my own:)
Author:  hutch9900 [ Sat Sep 14, 2013 9:22 am ]
Post subject:  Re: Cabin Table for Vista 268
The cherry tables are big $$$, but they sure are pretty. The trouble is, that we dont really use it that much. It spends most of the time in the mid berth.
Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/