| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| 318 trailer for sale https://www.smwebhead.com/phpBB3/viewtopic.php?f=8&t=12624 |
Page 1 of 1 |
| Author: | jsimon [ Sun Feb 09, 2014 2:56 pm ] |
| Post subject: | 318 trailer for sale |
Hi guys, If anyone is interested or knows someone interested in a 2006 metalcraft boat trailer. It's a #18,000 gvw Tri axle bunk trailer. Trailer weight is approx #2,450. Tires are less than 2 years old, and I added a 2nd spare. Trailer is white in color. Asking $5,000.00. This trailer is a bit unique, it is 120" wide. That may give some some grief, on state laws. I didn't have any problems with it, in michigan you can get extended overwidth permits. I liked having the extra width, the sides of the boat only hung over about 4 1/2" each side. I have some photos I can email, or if you have any questions, just let me know Thanks This trailer would not be available until May. Part of the deal I made with the boat sale is I need to tow it to Traverse City in May. |
|
| Author: | jnizi [ Wed Feb 12, 2014 5:01 pm ] |
| Post subject: | Re: 318 trailer for sale |
Wonder if my 338 would fit on it properly? |
|
| Author: | jsimon [ Wed Feb 12, 2014 10:00 pm ] |
| Post subject: | Re: 318 trailer for sale |
I'm sure it wouldn't without some modification. My guess is you would have to add 12" to the rear of it to keep the weight distribution and not hang of the back of it. The rear of the bunks end right at the end of the transom on the 318. If you moved the winch stand up a foot and added a foot on the rear it should be close. Not sure on the bunk spacing with the extra 9" of beam. Let me know if you need some measurements. I doubt metalcraft would tell you much but you could call and ask them |
|
| Author: | jsimon [ Fri Mar 07, 2014 7:18 am ] |
| Post subject: | Re: 318 trailer for sale |
Bump |
|
| Author: | jsimon [ Mon Apr 14, 2014 10:51 am ] |
| Post subject: | Re: 318 trailer for sale |
bump |
|
| Author: | jsimon [ Mon May 19, 2014 3:37 pm ] |
| Post subject: | Re: 318 trailer for sale |
bump, any body? |
|
| Author: | jnizi [ Thu May 22, 2014 7:20 am ] |
| Post subject: | Re: 318 trailer for sale |
Have not had the time to figure out how much work I would need to do to fit the 338. |
|
| Author: | jsimon [ Thu May 22, 2014 11:58 am ] |
| Post subject: | Re: 318 trailer for sale |
I have been stalling putting it up on craigslist due to the cold temps here pushed our delivery back. We delivered last weekend so its going up today. |
|
| Author: | jsimon [ Mon Jun 09, 2014 2:38 pm ] |
| Post subject: | Re: 318 trailer for sale |
sold |
|
| Author: | firecadet613 [ Mon Jun 09, 2014 2:55 pm ] |
| Post subject: | Re: 318 trailer for sale |
Congrats! |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|