Seadek on a 268

Pipedreams · **Joined:** Tue Mar 29, 2011 6:19 pm **Posts:** 99

Has anyone installed Seadek on a 268, i would love to see some pics or hear about cost and how you like it.

crimepays · **Joined:** Tue Sep 28, 2010 8:27 am **Posts:** 14

I actually emailed them for a quote today, for my 2003 268. Will update when I hear something.

Cap'n Morgan · **Posted:** Thu Jan 28, 2016 3:01 pm

Note: pic is of someone else's boat
Seadek part # for 268 Vista is 11469

Jdpber · **Posted:** Fri Jan 29, 2016 11:08 am

i have installed it and similar products. The key element is time and preparation and proper cleaning of the application surface. The application process is not hard and a few good videos on youtube.

Clean, Prep, layout the pieces, tape them down, double check everything. check it again. now start the peal of the backer in one corner with the piece taped down. adhere that small corner and make sure it is where you want. then slowly peal the backing and press firmly going slow.

now for the cost. I know that the FO-Teak look is $$$ i will guess that ^^^ what is shown above is about $400 area

www.iFourWinns.com

Seadek on a 268

Who is online