www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

2004 225 sundouwner
https://www.smwebhead.com/phpBB3/viewtopic.php?f=8&t=4961
Page 1 of 1

Author:  legalise [ Tue Jan 12, 2010 9:52 am ]
Post subject:  2004 225 sundouwner

Hello fellow-Four Winns-owners,
Living in The Netherlands (Eur) imported from private US seller The Boat.
Equiped with a 5.0 mpi B3. After many funfilled years with a Bayliner 2052CC (1999), I assume
my recent buy is a gigantic leap forward. Despite my joy some items are missing or are not working properly. Hope someone can provide information, selling-adresses or even better have the parts in "stock". Looking for : snap in carpet, table-leg, color-green side certains for my bimini-top (port-, starboard and the rear), throttle-unit complete, the boat is equipped with a substitute tachometer I like to install an original with hourcounter but I,m unaware whether it is a 6000 or 7000rpm meter.
Thank you in advance and receive hereby warm Four Winns greetings.
Hein

Author:  aguyindallas [ Tue Jan 12, 2010 10:05 am ]
Post subject:  Re: 2004 225 sundouwner

Check out one of the favored vendors here...Winnisquam Marine. http://winnisquammarine.com/

Author:  firecadet613 [ Tue Jan 12, 2010 6:29 pm ]
Post subject:  Re: 2004 225 sundouwner

After looking at the pictures of my '04 225 Sundowner with the 5.7 motor, it had a 6000 RPM tach.

Author:  Corinthian [ Wed Jan 13, 2010 6:17 pm ]
Post subject:  Re: 2004 225 sundouwner

Wish I could help you on the carpet, as we do custom carpeting for boats...but I'm sure shipping the carpet would be very spendy to the Netherlands...

Author:  legalise [ Sat Jan 16, 2010 8:15 am ]
Post subject:  Re: 2004 225 sundouwner

aguyindallas wrote:
Check out one of the favored vendors here...Winnisquam Marine. http://winnisquammarine.com/


Hallo, thanks for coöperative assisitence.

Author:  legalise [ Sat Jan 16, 2010 8:17 am ]
Post subject:  Re: 2004 225 sundouwner

firecadet613 wrote:
After looking at the pictures of my '04 225 Sundowner with the 5.7 motor, it had a 6000 RPM tach.


Hi, a great help, precise ordering is now possible. Thank you

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/