www.iFourWinns.com

So cleaning up the drive before painting and managed to get some pretty nasty mostly brown water from the bottom drain. Just curious what it is vented to.

Also....when reinstalling last year I put some RTV on the mating surface and believe this is where I got some water intrusion into the drive bellows. Should I use nothing or maybe a tiny bit of triple guard grease? Manual is not very clear on the subject.

Untitled by Jon Miller, on Flickr

Untitled by Jon Miller, on Flickr

_________________
Jon Miller
1998 four Winns Horizon H200
Volvo Penta 4.3 GL
Newtown, CT

untitled-545 by millerjont, on Flickr

that is a drian hole for the area below the zinc

_________________
2005 vista 288